Feature 9 of 10, Screen capture.

Put a screen on air, with its sound.

A display, a window or a single app, chosen in macOS’s own picker, with that app’s sound on its own channel in the show mixer. Cut to it like a camera, or place it beside your camera in one picture.

The show mixer, with MUTE MICS, MUTE MUSIC and MIC SETTINGS at the top right. Channels from the left: Host mic and Guest mic, each tagged VOICE; Program, tagged SCREEN; Over, IDLE; Fan videos, tagged SCREEN, its meter lit green; Music, its fader at −6.0; and Master, PGM, at the right. Each channel has a meter, a fader, its level and an M key.
A browser window on air, its sound on a Screen channel of its own in the show mixer, named after its input, with its fader and M key.

A display, a window or an app

The Q&A scene’s cards under the scene tabs: Host camera on air, ringed red with its Host mic badge; Guest camera; Shelf cam, a network camera; Call window marked SCREEN, its line reading Call — The Chill Room; and the Questions slide video.
The Call window in the Q&A scene: a screen input is a card like any other, marked SCREEN.

Chosen in macOS’s picker.

Add › Screen Capture… opens macOS’s own sharing picker: a whole display, one window wherever it is and whatever covers it, or all of one app’s windows. The new card says SCREEN, and on air it behaves like a camera: cut to it, crossfade to it, or, with Pro, place it as a layer of a composite next to your camera.

A screen is fitted whole, never cropped to fill the frame like a camera; crop and colour it in the Shot Editor like any picture. A window keeps its rounded corners, so it sits cleanly over whatever is behind it.

CamStation leaves itself out.

On a display capture, CamStation’s own windows are left out by default. The program monitor shows the program, which would show the display, which shows the monitor: an endless tunnel of pictures on air. When a capture could include it anyway, the SOURCE tab warns you and says how to avoid it.

Capture a window, not the whole display, whenever you can. A display shows everything that lands on it: a notification, a password manager, your desktop, the moment you drag another window across. A window capture shows that window and nothing else.

Its sound, on its own channel

The inspector of the Fan videos screen input in the Q&A scene, on air, on its SOURCE tab. SCREEN, with a Choose… key: Shares Safari — Listener questions, State Capturing, Pointer on. APP AUDIO: App audio on; This Mac, mute here, off; Heard set to WHILE ON AIR, with ALWAYS beside it and the note: Always keeps a call guest heard when you cut to another shot; Level, a meter lit green; State, Capturing Safari’s sound. FRAME: Fit, Automatic.
The browser window’s SOURCE tab: what it shares, whether it’s capturing, and when the program hears its sound.

App audio, and when it’s heard.

A window or an app brings its own sound: the video playing in it, a voice in a browser call. App audio puts it on the program; Mute on this Mac silences it on your own speakers while the show still has it.

Heard: While on air plays it only while the screen is on air, as a shot or a visible layer: right for a video or a demo, whose sound belongs with its picture. Always keeps it heard whatever is on air, like a show mic: right for a voice, which doesn’t stop when you cut away from its picture. It then follows the mics’ rules, mutes with MUTE MICS, and, with auto-duck, lowers the music bed when it speaks.

In the mixer and the recording.

Each screen with app audio gets its own Screen channel in the show mixer, named after its input, with its fader and mute. A recording with separate tracks writes it to a track of its own, so the editor can balance it again.

Call apps are never captured: Zoom, Teams, Webex, FaceTime and the like. Their sound on the program would go back into the call, and the guest would hear themselves. A call in a browser tab can be captured: if its microphone is CamStation Microphone, the guest hears the program, so wear headphones and check on the monitor that nobody hears an echo.

Turn App audio off on a screen whose sound you don’t want, such as a browser with other tabs that may play. An app that plays nothing costs nothing; one that suddenly plays an advert is on air.

Captured only while it’s needed

You decide what is shared, and when it stops.

A screen is captured only while it’s needed: on the program, in a transition, prepared for a take, or open in the Shot Editor. The card shows the last frame it captured, so browsing your cards never starts a capture. While one runs, macOS shows its screen-recording indicator in the menu bar.

Stop sharing from that indicator and CamStation treats it as your decision: the card reads Screen sharing stopped and shows no picture until you choose it again. If a window closes or a display is unplugged, the input holds its last frame until it’s back.

Allowing Screen Recording in the setup lets every screen input find its display, window or app again when CamStation starts; a window is found by its app and its title. Without it, an input starts as CHOOSE AGAIN, and cutting to it is refused with the reason until you do, so nothing empty goes on air.

CamStation Setup on its third step, Screens and Their Sound, after Camera and Microphone, before Updates and Privacy. Optional: two permissions for screen and window inputs; capturing a screen works without either. Screen Recording: screen and window inputs come back by themselves when CamStation starts; without it, you choose them again each time; Allowed. App Audio: a window’s or an app’s own sound goes on air with it; without it, screens are silent; Not allowed yet, with an Allow App Audio… key. A Continue key at the bottom.
The setup’s screen step: both permissions are optional, each with its own key.

Make it readable on air

What reads on your screen is often too small on theirs.

Your audience watches the program scaled into a call window, a phone or a corner of their screen, after compression. Text is where a screen loses most.

Enlarge before you share. Zoom the browser in (Command + two or three times), use the app’s presentation or reading mode, raise the font size, hide toolbars and sidebars. As a rule of thumb, body text should end up at least 30 to 40 pixels tall in a 1080p program to stay readable in a call window.

Shape the window like the show (16:9 for a landscape show) and it fills the frame without bars. Keep the pointer still when you’re not pointing at something, or turn Pointer off for slides. And prepare the content off air: the right tab, the right place, nothing that shouldn’t be seen.

At a glance

Shares
A display, one window, or all of one app’s windows.
Chosen in
macOS’s sharing picker; no permission needed to capture. Screen Recording, optional, lets inputs come back by themselves after a relaunch.
Picture
Fitted whole; a window with its rounded corners; the pointer on or off.
App audio
A window’s or an app’s sound; Mute on this Mac; Heard while on air or always. Needs macOS’s System Audio Recording permission.
Mixer
A Screen channel per input with app audio; a track of its own in a recording.
Left out
CamStation’s own windows (unless you show them); call apps; a display brings no sound.
When it runs
Only while on air, in a take, prepared or in the Shot Editor.
Tier
Part of CamStation Free. A screen as a layer of a composite shot needs Pro, as any composite does.

Questions

Can I capture a single window instead of the whole screen?

Yes: a display, one window, or all of one app’s windows. A window is captured whole wherever it is and whatever covers it on your screen, so nothing else on your desktop reaches the program.

Does it capture the app’s sound?

Yes, for a window or an app: its sound gets its own Screen channel in the show mixer and its own track in a recording, heard while the screen is on air or always, as you choose. A whole display brings no sound.

Can I capture Zoom, Teams or FaceTime?

Call apps aren’t captured: their sound on the program would go back into the call, and the guest would hear themselves. A call in a browser tab can be captured, with its sound; wear headphones and check on the monitor that nobody hears an echo.

Do I have to allow Screen Recording?

No. You choose what to share in macOS’s own picker, which needs no permission. Allowing Screen Recording lets your screen inputs come back by themselves when CamStation starts; without it, you choose them again each time. App audio needs macOS’s System Audio Recording permission.

Read on

Your show, on your Mac, the way broadcast does it.

Be the first to know when the beta opens.