Feature 3 of 10, Sound, free; part of CamStation Pro: The mic channel strip, The master strip.

Sound like a broadcast.

A mixer per show, a broadcast channel strip on every mic with voice isolation on by default, and a master that holds your show to its loudness target without ever clipping.

Pro:The mic and master strips’ processing, with a 30-second audition · The mixer, the limiter and the loudness meters in every version

The show mixer open. In the header, the red MUTE MICS and MUTE MUSIC keys and the MIC SETTINGS key. Below, a rack of modules: Host mic and Guest mic, both tagged VOICE; Program, tagged CAMERA; Over, tagged IDLE; Music, its fader at −6.0; and, pinned at the right, Master, tagged PGM. Each module has a standing meter with its dB scale, a vertical fader, a name and level display, a red M key and, on the mics, the music and the master, a strip key at the top.
The show mixer of The Chill Room, with the host camera on air: both mics, the music and the shot’s own sound live.

One mixer per show

Every sound of the show, on its own channel.

The show mixer sits under the cards, the same under every scene, so moving to the next part never changes a level. From left to right: one channel per show mic, then Program (the shot on air), Over (sounds and over-shots), Screen (an app’s sound), Music and the Master. A channel exists only while it has a source.

Rules instead of routing.

Instead of a routing grid on every shot, each show has two rules: when a clip is on air, the mics and the music are silenced; when a camera or a screen is on air, they are open. Choose to lower them by 12 or 20 dB instead, to talk over the end of a clip, and let any one shot differ. They go down and come back with the take, on the same curve as the picture.

Only you move a fader. When something else lowers a channel, it does it underneath the fader and the channel’s lamp says why: AUTO MUTED, DUCK, OFF CAM or MUTED.

A quiet channel with no reason shown is the most stressful thing in live sound. The lamp tells you at a glance whether the silence is a decision or a problem.

MUTE MICS is your cough key. Learn Control Option Command M before the show: it silences every show mic at once, from anywhere in the window. MUTE MICS and MUTE MUSIC always flip what is heard, and stay lit while their subject is silent, whoever silenced it.

The show mixer has one channel per source, in a fixed order: the show mics (each through its mic strip, then delayed to meet the picture), Program (the sound of the shot on air), Over (over-shots and sounds over the program), Screen (a captured app’s sound) and Music (the music bed). Each has a fader. Rules, not routing: a shot on air can silence or lower the show mics and the music, moving with the take; auto-duck dips the music while someone speaks, if you turn it on. Everything is summed into the Master channel and its master strip (high-pass, EQ, width, glue compressor, the Master fader, then the Limit stage at −1 dBTP) and goes onto the Program Bus, CamStation Microphone, the one audio clock. Calls and apps, the streams and the recorder all take that same sound; your headphones hear it too, with the mics direct.

Each source on its own channel, the rules acting on the mics and the music, everything summed through the master strip into the program that every call, stream and recording takes.
The show mixer with a video on air: Host mic, Guest mic and Music read AUTO MUTED, Program reads VIDEO and its meter is lit, and the MUTE MICS and MUTE MUSIC keys are lit red.
A video on air: the show’s rules have silenced both mics and the music, and MUTE MICS and MUTE MUSIC say so.

A broadcast strip on every mic

What a broadcast engineer would put on a voice.

Every mic runs through its own channel strip, in a fixed order: Isolate (macOS’s voice isolation), a high-pass filter, Gate, EQ, Compress and a true-peak Limit. One main control per stage, every parameter under Advanced, every slider live while you drag.

Voice, a new mic’s preset, is controlled and present, and cleans an untreated room with voice isolation at 70 %. Broadcast is denser and brighter, for a good mic in a quiet room: the sound of radio. A/B compares with the raw mic, without a click. A mic’s strip belongs to the mic, so it sounds the same in every show.

Switch a stage on or off mid-show: each mic’s wait for its camera’s picture already includes voice isolation, the limiters’ look-ahead and the device itself, so your voice never moves against your lips. How the engine works →

The Mic Process Chain panel. At the top, Advanced… and a PRO badge; the presets OFF, VOICE (chosen) and BROADCAST, and an A/B key. An INPUT meter. Then one row per stage, each with a power key: Isolate, Amount 70 %; Gate, Threshold −50 dB, with its state; EQ, Low, Mid and High at 0.0 dB; Compress, Amount 50 %, with its gain reduction; Limit, Ceiling −1.0 dBTP, with its gain reduction; then Output, Level 0.0 dB. An OUTPUT meter, and the output's short-term loudness in LUFS.
The host mic’s channel strip on the Voice preset.

Set the level by talking, the way you will in the show: same distance, same energy, a real sentence. Normal speech should move into the amber, and only a laugh should reach the red. Then leave the trim alone and balance with the faders.

The mic strip’s processing is part of CamStation Pro. Without it, the program gets your mic with its trim and level, and Audition 30 s plays the whole strip on your monitor.

Loudness, held at the master

The Master Out Process Chain panel. At the top, Advanced… and a PRO badge; the presets OFF, DEFAULT (chosen) and BROADCAST, and an A/B key. An INPUT meter with L and R. Stage rows: High-pass, on, 30 Hz; EQ, off; Width 100 % with its correlation bar, Bass mono off; Glue, off; Limit, on, Ceiling −1.0 dBTP. An OUTPUT meter. A loudness line: M, S and I in LUFS, TP in dBTP, TGT −16 LUFS, and a Reset button. Below, the MONITOR section.
The master strip on its Default preset, with the loudness line and the monitor.

The number your audience feels.

CamStation aims at −16 LUFS, the usual loudness for spoken programmes online. Most of the work happens before the master: clips are measured when they come into the Library and played at that loudness, a voice leaves the Voice preset near it, and a music bed sits ten under.

The master strip watches and protects: high-pass, EQ, stereo width with a bass-mono option, a gentle glue compressor, and the program’s one limiter, which looks 1.5 ms ahead and holds the true peak at −1 dBTP. The loudness line reads momentary, short-term and integrated loudness and the true peak, measured to ITU-R BS.1770 and EBU R128.

Streams and calls are encoded, and decoding can add about a dB to the peaks. A ceiling of −1 dBTP leaves that margin, so the program doesn’t distort on the viewer’s side.

A minute of the program on one level scale. The peaks, the instant tops of the waveform measured as true peak, jump up and down; the master strip’s Limit stage holds them at its ceiling, −1 dBTP by default, so the program never clips. The loudness, what the ear hears measured over 3 seconds in LUFS, moves slowly round the program’s target of −16 LUFS, well under the peaks. Music used as a bed (BED) is normalised to −26 LUFS, ten under the target, so it sits under the voices.

A minute of the program on one scale: the peaks jump about and the limiter holds them at −1 dBTP; the short-term loudness moves slowly round the −16 LUFS target; a music bed sits at −26 LUFS, ten under.

Hear what your audience hears

The program, in your headphones.

The monitor sends a copy of the program to the output you choose, at your own listening level: after every fader, mute, rule, strip and limiter, exactly what the call, the stream and the recording get. Changing its device or level never touches what goes out.

With Mics direct, on by default, you hear your own voice without the delay that keeps it on your lips for the audience, so you never hear yourself late.

Checks only you can hear.

Mono check folds the monitor to mono, to hear the show as a phone speaker plays it. CUE plays the next song’s start on your headphones while the current one is on air, and the Library previews a file the same way.

Listen to a whole rehearsal on closed headphones. Music too loud under a guest, a mic left open over a video, a clip that plays silent: obvious in your ears, easy to miss in the room.

Good sound starts at the mic

  • Get close, and stay there.

    With a dynamic or USB mic, a hand’s width away. Distance changes level and tone more than any setting.

  • Talk across the mic, not into it.

    Angle it at your chin or the corner of your mouth, so breath and plosives pass it by.

  • In an untreated room, use a dynamic mic.

    A condenser hears the whole room; a dynamic mic close to your mouth hears mostly you.

  • Wear headphones.

    On speakers, the call and the show leak back into your mic, and the people in the call hear themselves as an echo.

At a glance

Show mics
Up to four captured at a time, any input, any sample rate; paired with their camera if they come with one.
Mix
48 kHz, 32-bit float, stereo.
Mic strip
Isolate, high-pass, Gate, EQ, Compress, Limit (true peak), Output. Presets Voice (a new mic’s default), Broadcast and Off; A/B.
Master strip
High-pass, EQ, Width with bass mono, Glue, Limit at −1 dBTP with 1.5 ms look-ahead. Presets Default, Broadcast and Off; Off keeps the limiter on.
Loudness
Momentary, short-term and integrated LUFS and true peak, ITU-R BS.1770 and EBU R128; target −16 LUFS.
Monitor
The program on the output you choose, at your own level; mics direct, mono check, cue and previews.
Keys
Mute Mics Control Option Command M · Mute Music Control Option Command U · Show Mixer Option Command M
Tier
The mixer, the rules, the limiter, the loudness meters and the mono check are in every version. Pro:The mic and master strips’ processing is part of CamStation Pro.

Questions

Which microphones can I use?

Any audio input your Mac sees: a USB microphone, an audio interface, or the mic built into a webcam or carried by a capture card. CamStation captures up to four show mics at a time, at whatever sample rate each runs. For anything on air, use a wired mic: Bluetooth adds a large delay of its own, and it varies.

What does voice isolation do?

It separates your voice from the noise under it, during your words as well as between them: a fan, traffic, a keyboard. It is macOS’s own voice isolation, on by default at 70 % in the Voice preset.

How loud should my stream be?

For spoken shows online, about −16 LUFS integrated with true peaks at −1 dBTP or below, which is what CamStation aims at. Music platforms and YouTube use about −14 LUFS and turn louder programmes down, so there is nothing to gain above it. The loudness meters show momentary, short-term and integrated loudness and the true peak, in every version.

Should I turn off noise suppression in Zoom or Meet?

Yes. CamStation has already cleaned and levelled your voice; processing it twice can make it pump or sound underwater, and a call’s noise suppression chops up music and clip sound. In Zoom, turn on Original sound for musicians; elsewhere, set noise suppression to off or low.

Read on

Your show, on your Mac, the way broadcast does it.

Be the first to know when the beta opens.